Application Function Block 'Move Absolute'

Application Function Block 'Move Absolute'

The Application Specific Function BLock (ASFB) OrmAppMoveAbsAnalog for ORMEC's SMLC controller commands a move to a position based on the value of an analog input, then optionally continues to track the changing input.

An absolute position is calculated from the analog voltage input on a SAC-SD series drive. Once the initial move to the position is complete, the function block will, optionally, continue to track the
changing analog input with the position command being updated 5000 times per second. The drive analog input has a digital low-pass filter with a cut-off frequency settable from 0.1 to 500 Hz.

This function block software may be download free of charge from the SMLC Software section of the Support Library.



Archive by Years
eNews Signup
Privacy StatementTerms Of UseCopyright © 2008-2015 ORMEC Systems Corp.