Ormec News

rss

Keep up to date on everything ORMEC by visiting the ORMEC News daily.

View this email in your browser

2018 Mid-Summer Special - Factory Repairs

Special on ORMEC items sent for repairs
ORMEC is pleased to announce a new program through the end of July 2018 on any items sent to ORMEC for factory repair. Any item returned to ORMEC by July 31, 2018 for ORMEC factory repair will receive an additional 3-years of warranty, for a total of 5-years.

Repair Services 
Full repair services are provided for all our products.  ORMEC’s factory repair services include warranty and non-warranty repair. Repairs are backed by a two-year warranty (5-years through the end of July '18). Special handling services, including expedited repairs and emergency exchange/replacement are available. All returns require a Return Authorization (RA) number.  Once a request for repair of an ORMEC item is initiated, the following will occur:

  • A flat-rate charge will be assigned to each ORMEC item to be returned.
  • All items sent into ORMEC will undergo much of the same testing as new ORMEC products including:  
    • Thoroughly inspected, tested, and burned-in at elevated temperatures.
      • Servo Drives to be tested under load.
    • All repairs correcting functional or performance issues completed.
    • All applicable standard upgrades performed.
    • When applicable application programs & files downloaded and archived at ORMEC.
    • Cleaned and minor cosmetic damage repaired.
Repairable ORMEC Products Include:

Contact ORMEC directly at:  (585) 385-3520
or via e-mail at:  support@ormec.com
 

ORMEC Solutions For Machine Life Extension

Product obsolescence in today's environment is inevitable.  Electronic components used in today's automation control systems are often discontinued by electronic chip makers with little to no warning.  When this happens, many control manufacturers will stop production with little to no warning to their customers.   This forces companies to keep production machines running with obsolete control systems.

When issues arise, companies may be required to find support on their own.  When support is available from the original manufacturer, costly repairs, long lead times and premium service rates are often the norm, with little or no guarantee of functionality or reliability.

ORMEC's philosophy of total customer support results in the creation of high quality products as well as product life cycles exceeding the industry standard.   For new machines, you can be assured that an ORMEC solution will be available for a long time.  For existing machines, ORMEC has created solutions to increase the useful life of your capital equipment while minimizing the financial impact when compared to the costs associated with complete machine retrofits or even the cost of a new machine.  Some examples of possible solutions are listed below:

ORION processor versions /A - /E Upgrade:  First introduced in the 1990's, the ORION Motion Control recently received an upgrade to the system processor, taking advantage of new technology as well as responding to the obsolescence of a key electrical component.  The results, an extension of ORION's life cycle, without sacrificing performance and reliability.  

The new processor is faster than all previous options with the same functionality.  The upgrade also includes updates to other system firmware insuring compatibility and performance is maintained.  This upgrade to the ORION extends the life your ORION controlled machine.  read more.... 
 
ORION DSP to  D-Series and F-Series Servo Drives:  New life to your existing machines can be achieved by replacing obsolete D & F-Series servo drives with new S2D-Series servo drives.  This change includes increased performance and maintainability of the ORION control by converting its DSP analog Interface to the digital ServoWire interface on the S2D-Series servo drives.  Plus the flexible motor interface of the S2D-Series servo drives allows you the option of keeping your existing servo motors or identify new motors with identical mounting dimensions or a combination of both.  Thus you can avoid the additional costs and delays developing new motor mounting brackets and motor couplings.    read more...

GEN3 Upgrade:  The GEN3 GEN 3 Multi-Axis motion controller reached the end of its life-cycle in 2013.  Though some repair options exist, other options that minimizes financial impact while increasing machine life are also available from ORMEC.

One option is to upgrade to the Orion w/ ServoWire interface to the S2D-Series servo drives. This path is relatively easy as the MotionBasic software and I/O is easily reconfigured from the GEN3 to the ORION Platform.  
   
Another option is upgrading to the SMLC multi-axis controller also with with S2D-Series servo drives. This path requires additional software changes, but by combining ORMEC's motion engine with a high performance PLC, an upgrade to an SMLC provides a complete upgrade path for not only the motion, but I/O control as well.  Plus the flexible motor interface of the S2D-Series servo drives you still have the option of keeping your existing servo motors or identify new motors with identical mounting dimensions or a combination of both.  Thus you can avoid the additional costs and delays developing new motor mounting brackets and motor couplings. 

These options can also be used  together in a two-step process, providing an incremental upgrade spread over time, minimizing the financial impact.  In the two-step process, the first step is changing out the GEN3 to ORION w/Servo wire Control and Drives.  Transitioning from GEN3 to ORION requires minimal update to the original application, resulting in lower machine down-time and software development costs. 

At a later date, updating the controller to the SMLC could be implemented, but only the controller is replaced since the SMLC uses the same S2D-Series servo drives.  And who better to understand the application requirements originally developed in the GEN3 than an ORMEC Engineer, thus insuring the transition meets or exceeds original performance requirements.

Total Solution Provider:  One of the biggest challenges today is finding the resources that understand the original system and then has the capabilities to provide an upgrade package as a turnkey solution. 

As part of you upgrade solution, let ORMEC Systems Engineers design and manufacture in our UL508A certified electrical panel shop, a turn-key solution for you.    Upon completion of a turn-key system, created drawings and application source code will be provided to you as well as saved at ORMEC.  As the end-customer, you can participate in as much or as little possible, depending upon your own capabilities.  Long distance support can also be achieved instantaneously via our Remote Diagnostic Program, where the System Engineers can immediately access the entire system remotely.  

ORMEC For the Long-Term:  Unlike some automation equipment providers, ORMEC will continue to support and repair even items that are considered out of production and obsolete.  How many times have you called for support only to be told that if parts were available, the lead-time is measured in months and price is measured in $$$$$ or even have the original manufacture disavow all knowledge.  This occurring after paying 20-years of annual fees for software, just for the pleasure of using their products.    

We can work with you to upgrade older control systems regardless of manufacturer, or in the development of new applications with the knowledge that ORMEC is committed to providing its customer with long-term support of all its products.  

For further information visit the ORMEC website at www.ormec.com.  


GEN3 - Changes to After-Market Support

Changes to GEN3 After-Market Support:  The GEN3 multi-axis motion controller, introduced in 1990, reached end of production status in 2013.  After market support for the GEN3 continues to this day, however effective July 1, 2018, phone and e-mail support for the GEN3 will become a paid service.  ORMEC's standard service rate with a minimal time of 4-hours will be applied for all phone and e-mail support of the GEN3.  On-Site service as well as repairs remains at current rates.  

No charges will be applied on calls to discuss upgrading existing GEN3 systems.  Also, any previously paid phone or e-mail support for a GEN3 that ultimately results in system upgrade to either an Orion w/ ServoWire or SMLC will have the associated fee deducted from the total price of the upgrade.    


About ORMEC
 
     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.
 
     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

 
Copyright © *|CURRENT_YEAR|* *|LIST:COMPANY|*, All rights reserved.
*|IFNOT:ARCHIVE_PAGE|* *|LIST:DESCRIPTION|*

Our mailing address is:
*|HTML:LIST_ADDRESS_HTML|* *|END:IF|*

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.

*|IF:REWARDS|* *|HTML:REWARDS|* *|END:IF|*

ORMEC Changes to Motor Line-Up

N-Series Motors:  New Model Additions
ORMEC is pleased to announce the addition of several new models to the line-up of N-Series motors that includes motors on both ends of the Speed/Torque Curve.
 
On the lower continuous torque range, the NE-Model of motors adds capabilities ranging from 2.83 lb·in (.23 NM) to 42 lb·in (4.77NM) continuous torque with maximum speeds reaching 6,000 RPM.
 
On the opposite end of the continuous torque spectrum, two new models are introduced, MAC-NB840C and MAC-NC1200C, (95.4 NM) and 1239 lb·in (140 NM) respectively. 
 
Table 1 shows all currently available new N-Series Motor Part Numbers.

Part Number Description
MAC-NE003B-KAB N-SVMTR 3 in-lbs 200V Key Abs BRK
MAC-NE003B-KAN N-SVMTR 3 in-lbs 200V Key Abs
MAC-NE006B-KAB N-SVMTR 6 in-lbs 200V Key Abs BRK
MAC-NE006B-KAN N-SVMTR 6 in-lbs 200V Key Abs
MAC-NE011B-KAB N-SVMTR 11 in-lbs 200V Key Abs BRK
MAC-NE011B-KAN N-SVMTR 11 in-lbs 200V Key Abs
MAC-NE021B-KAB N-SVMTR 21 in-lbs 200V Key Abs BRK
MAC-NE021B-KAN N-SVMTR 21 in-lbs 200V Key Abs
MAC-NE042B-KAB N-SVMTR 42 in-lbs 200V Key Abs BRK
MAC-NE042B-KAN N-SVMTR 42 in-lbs 200V Key Abs
MAC-NB840C-SAB N-SVMTR 844 in-lbs 400V Str Abs BRK
MAC-NB840C-SAN N-SVMTR 844 in-lbs 400V Str Abs
MAC-NB840C-S1B N-SVMTR 844 in-lbs 400V Str Inc BRK
MAC-NB840C-S1N N-SVMTR 844 in-lbs 400V Str Inc
MAC-NB840C-KAB N-SVMTR 844 in-lbs 400V Key Abs BRK
MAC-NB840C-KAN N-SVMTR 844 in-lbs 400V Key Abs
MAC-NB840C-K1B N-SVMTR 844 in-lbs 400V Key Inc BRK
MAC-NB840C-K1N N-SVMTR 844 in-lbs 400V Key Inc
MAC-NC1200C-KAB N-SVMTR 1239 in-lbs 400V Key Abs BRK
MAC-NC1200C-KAN N-SVMTR 1239 in-lbs 400V Key Abs

Table1:  List of available new N-Series Servo Motor
 
Go to the ORMEC Web-site for N-Series more details on the new motors.  Updated datasheet available now for immediate download.

D-Series Motors:  End of Production
Introduced in the early 1990's, the D-Series motors have been used on a broad range of applications initially with the GENIII Motion Control System and then later, the ORION Motion Control System.   

These motors, have been available and continually supported throughout the entire production run and even today, they are still supported in the latest ORMEC Motion Control Systems including the XD-Series Indexer and all ServoWire® based Servo Drives with SMLC.
 
Availability of products classified as End of Production is extremely limited.  Once supplies are exhausted, they will be listed as obsolete.  ORMEC will also continue to provide limited support and repair for motors in the field.  

Effective April 1, 2018, some models of D-Series Motors will also receive a price increase.  Orders received prior to April 1, 2018 with requested delivery prior to August 31, 2018 will not be subjected to the price increase.  Orders received after April 1, 2018 or with a requested delivery date beyond August 31, 2018 will be subject to the price increase.

HE-Model of H-Series Motors:  End of Production
Introduced in the late 1990's, the H-Series motors have been used on a broad range of applications initially with the ORION Motion Control System and then later, the XD-Series Indexer and all ServoWire® based Servo Drives with SMLC

The H-Series Motors included in its model range, the HE-Model have continuous torque rating between 2.8 in-lb and 42 in-lb providing big performance in a small package.  The specific models included are as follows:

  • MAC-HE003A/xy
  • MAC-HE003B/xy
  • MAC-HE006A/xy
  • MAC-HE006B/xy
  • MAC-HE011B/xy
  • MAC-HE021B/xy
  • MAC-HE042B/xy

Where x and y specify encoder type and presence of a brake respectively.  

Availability of products classified as End of Production is extremely limited.  Once supplies are exhausted, they will be listed as obsolete.  ORMEC will also continue to provide limited support and repair for motors in the field.  All models of H-Series were set to Legacy Status July 31, 2017.

For further information visit the ORMEC website at www.ormec.com.  

About ORMEC
 
     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.
 
     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.
 

 

 

N-Series, New Model Additions

 

March 2, 2018 – Rochester, New York, USA – ORMEC announces new models for N-Series Motors 

 

ORMEC is pleased to announce the addition of several new models to the line-up of N-Series motors that includes motors on both ends of the Speed/Torque Curve.

 

On the lower continuous torque range, the NE-Model of motors adds capabilities ranging from 2.83 lb·in (.23 NM) to 42 lb·in (4.77NM) continuous torque.  These motors, provide big performance in a small package includes specific models.

 

On the opposite end of the continuous torque spectrum, two new models are introduced, MAC-NB840C and MAC-NC1200C, (95.4 NM) and 1239 lb·in (140 NM) respectively. 

 

Table 1 shows all currently available new N-Series Motor Part Numbers.

Part Number

Description

MAC-NE003B-KAB

N-SVMTR 3 in-lbs 200V Key Abs BRK

MAC-NE003B-KAN

N-SVMTR 3 in-lbs 200V Key Abs

MAC-NE006B-KAB

N-SVMTR 6 in-lbs 200V Key Abs BRK

MAC-NE006B-KAN

N-SVMTR 6 in-lbs 200V Key Abs

MAC-NE011B-KAB

N-SVMTR 11 in-lbs 200V Key Abs BRK

MAC-NE011B-KAN

N-SVMTR 11 in-lbs 200V Key Abs

MAC-NE021B-KAB

N-SVMTR 21 in-lbs 200V Key Abs BRK

MAC-NE021B-KAN

N-SVMTR 21 in-lbs 200V Key Abs

MAC-NE042B-KAB

N-SVMTR 42 in-lbs 200V Key Abs BRK

MAC-NE042B-KAN

N-SVMTR 42 in-lbs 200V Key Abs

MAC-NB840C-SAB

N-SVMTR 844 in-lbs 400V Str Abs BRK

MAC-NB840C-SAN

N-SVMTR 844 in-lbs 400V Str Abs

MAC-NB840C-S1B

N-SVMTR 844 in-lbs 400V Str Inc BRK

MAC-NB840C-S1N

N-SVMTR 844 in-lbs 400V Str Inc

MAC-NB840C-KAB

N-SVMTR 844 in-lbs 400V Key Abs BRK

MAC-NB840C-KAN

N-SVMTR 844 in-lbs 400V Key Abs

MAC-NB840C-K1B

N-SVMTR 844 in-lbs 400V Key Inc BRK

MAC-NB840C-K1N

N-SVMTR 844 in-lbs 400V Key Inc

MAC-NC1200C-KAB

N-SVMTR 1239 in-lbs 400V Key Abs BRK

MAC-NC1200C-KAN

N-SVMTR 1239 in-lbs 400V Key Abs

Table1:  List of available new N-Series Servo Motor

 

Go to the ORMEC Web-site for N-Series more details on the new motors.  Updated datasheet available now for immediate download.

 

About ORMEC

     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

    For further information visit the ORMEC website at www.ormec.com

H-Series, HE-Models Motors at End of Production

 

March 2, 2018 – Rochester, New York, USA – ORMEC transitions the HE-Models of H-Series Servo Motors to End-of-Production.   

 

Introduced in the late 1990's, the H-Series motors have been used on a broad range of applications initially with the ORION Motion Control System and then later, the SMLC and XD-Series Indexer.

 

These motors, have been available and continually supported throughout the entire production run and even today, they are still supported in the latest ORMEC Motion Control Systems including the XD-Series Indexer and all ServoWire® based Servo Drives with SMLC.

 

The H-Series Motors included in its model range, the HE-Model have continuous torque rating between 2.8 in-lb and 42 in-lb providing big performance in a small package.  The specific models included are as follows:

  • MAC-HE003A/xy
  • MAC-HE003B/xy
  • MAC-HE006A/xy
  • MAC-HE006B/xy
  • MAC-HE011B/xy
  • MAC-HE021B/xy
  • MAC-HE042B/xy

Where x and y specify encoder type and presence of a brake respectively. 

 

Availability of products classified as End of Production is extremely limited.  Once supplies are exhausted, they will be listed as obsolete.  ORMEC will also continue to provide limited support and repair for motors in the field.  All models of H-Series were set to Legacy Status July 31, 2017.

 

About ORMEC

 

     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

    For further information visit the ORMEC website at www.ormec.com

All D-Series Motors at End of Production

 

February 28, 2018 – Rochester, New York, USA – ORMEC transitions D-Series Servo Motors to End-of-Production.   

 

Introduced in the early 1990's, the D-Series motors have been used on a broad range of applications initially with the GENIII Motion Control System and then later, the ORION Motion Control System.   

 

These motors, have been available and continually supported throughout the entire production run and even today, they are still supported in the latest ORMEC Motion Control Systems including the XD-Series Indexer and all ServoWire® based Servo Drives with SMLC.

 

Availability of products classified as End of Production is extremely limited.  Once supplies are exhausted, they will be listed as obsolete.  ORMEC will also continue to provide limited support and repair for motors in the field. 

 

Effective April 1, 2018, some models of D-Series Motors will also receive a price increase.  Orders received prior to April 1, 2018 with requested delivery prior to August 31, 2018 will not be subjected to the price increase.  Orders received after April 1, 2018 or with a requested delivery date beyond August 31, 2018 will be subject to the price increase.

 

About ORMEC

 

     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

    For further information visit the ORMEC website at www.ormec.com.  Detailed specifications, manuals and videos for the XD-are available at www.ormec.com/Indexer


ORMEC Introduces Two New Sales Engineers

ORMEC is pleased to announce the addition of two new ORMEC Senior Sales Engineers supporting our North American Customers.

Ken Karns:  Cleveland, OH
Ken has 30-years of Industrial Automation Experience providing technical and commercial expertise that includes establishing a significant North American presence for a number of off-shore motor and motion system manufacturers, as well as his last position, overseeing the sales department at a OH based machine builder and integrator.  Ken will be based in the Cleveland area with a focus towards new customers as while supporting ORMEC's existing customer base throughout the Midwest.  

Dave Palmer:  Dallas, TX
With over 35-years in the CNC/Motion Industry, Dave comes to ORMEC with extensive application and sales experience in high-end motion control and servo technology including CNC and general motion as well as linear and torque motors.    Dave’s dedicated support to his customers have earned him the respect and admiration from his customers and will be a great asset to ORMEC’s new and existing accounts.

The territories for ORMEC’s field sales personnel is shown in the map below.

Ken Karns – Purple Territory can be reached via e-mail at Kkarns@ormec.com
Dave Palmer – Yellow Territory can be reached via e-mail at dpalmer@ormec.com
Bill Catalano – Green Territory can be reached via e-mail at bcatalano@ormec.com

ORMEC End of Year Shutdown Schedule
Please Note that ORMEC will be shut-down December 25th through January 1st
ORMEC will reopen on Tuesday January 2, 2018.
There will be limited staff available for emergency support.  
They can be reached @ (585) 385-3520




For additional information, contact ORMEC Sales Directly:

email: sales@ormec.com
In U.S.: (585) 385-3520
From Europe:  +1 (585) 385-3520



 
 
 
Copyright © 2016 ORMEC Systems Corporation, All rights reserved.

Our mailing address is:
19 Linden Park
Rochester, NY  14625
(585) 385-3520



 

H-Series Motors set to Legacy Status

First introduced in 2004, the H-Series motors have been used on a broad range of applications and are available with the XD-Series Indexer and all ServoWire based Servo Drives with SMLC or ORION Motion Controller. 
 
Legacy status implies that new applications and systems should transition as soon as possible to avoid increased lead time and costs.  Items with Legacy Status are still available new, but predominantly used for after-market and maintenance support.  New feature developments also cease in favor of the replacement product.
 
ORMEC will be announcing the release of the latest model of N-Series Motors MAC-NExyz in August of 2017, rounding out all motor models for ease of transition in form, fit and function from H-Series Motors to N-Series  motors.   Customers are encouraged to transition to the N-Series motors, for new and existing repeat applications
 
Effective October 1, 2017, there will be an increase in price for the H-Series motors.  Orders received prior to October 1, 2017 with requested delivery by December 29, 2017 will not be subjected to the price increase.  Orders received after October 1, 2017 or orders received prior to October 1, 2017 with a requested delivery beyond December 29, 2017 will receive the increase.
Please contact ORMEC if you have any questions.

For further information visit the ORMEC website at www.ormec.com.  
Click on H-Series or N-Series for specifications and manuals for the specific Motor Model.

About ORMEC
 
     ORMEC™s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.
 
     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.
 

 

 

Specify Alternate Text

All H-Series Motors set to Legacy Status

 

     July 31, 2017 – Rochester, New York, USA – ORMEC is changing to Legacy Status all H-Series Motors.

 

First introduced in 2004, the H-Series are used on a broad range of applications and are available with the XD-Series Indexer and all ServoWire based Servo Drives with SMLC or ORION interface. 

 

Legacy status implies that new applications and systems should transition as soon as possible to avoid possibility of increased lead time and costs.  Items with Legacy Status are still available new, but predominantly used for after-market and maintenance support.  New feature developments also cease in favor of the replacement product.

 

ORMEC will soon be announcing the release of the latest model of N-Series Motors MAC-NExyz, rounding out all motor models for ease of transition in form, fit and function from H-Series Motors to N-Series motors.   Customers are encouraged to transition to the N-Series motors, for new and existing repeat applications

 

Effective October 1, 2017, there will be an increase in price for the H-Series motors.  Orders received prior to October 1, 2017 with requested delivery by December 29, 2017 will not be subjected to the price increase.  Orders received after October 1, 2017 or orders received prior to October 1, 2017 with a requested delivery beyond December 29, 2017 will receive the increase.  Please contact ORMEC if you have any questions

 

About ORMEC

 

     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

    For further information visit the ORMEC website at www.ormec.com.  Detailed specifications, manuals and videos for the XD-are available at www.ormec.com/Indexer

Specify Alternate Text

KMD-50 & KMD-60 Electromechanical Actuators

 

June 2, 2017 – Rochester, New York, USA – ORMEC is pleased to announce the arrival of the KMD-50 and KMD-60 Electromechanical Actuators

 

The KMD-50 and KMD-60 are the first of a line of electromechanical actuators providing a powerful and efficient alternative to hydraulic or roller screw actuators applications such as pressing, metal and Thermo-Forming and other high load applications.

 

Designed and assembled in Rochester, NY the KMD Actuators are based on world class ball screw technology that is quieter and more efficient than other solutions.  Optimized to work with ORMEC Servo Motors, option for 3rd party motors are also available.

 

Specifications for the KMD-50 and KMD-60 are shown in Table 1.

 

 

 

KMD-50

KMD-60

Metric

US

Metric

US

Maximum Force:

80

kN

18,000

lbf

133

kN

30,000

lbf

Dynamic Load Rating:

178

kN

40,000

lbf

309

kN

69,400

lbf

Side Load Capacity:

4.45

kN

1,000

lbf

4.45

kN

1,000

lbf

Screw Lead:

12

mm

0.472

Inch

14

mm

0.551

Inch

Maximum Screw Speed:

3,000

rpm

3,000

rpm

2,400

rpm

2,400

rpm

Maximum Linear Speed:

600

mm/Sec

23.6

in/Sec

560

mm/Sec

22

in/Sec

Standard Strokes:

152, 203

mm

6 , 8

in

203, 254

mm

8, 10

in

Life at:

44.48

kN

10,000

lbf

89

kN

20,000

lbf

 

768.1 X 106

mm

30.24 X 106

in

585 X 106

mm

23 X 106

in

Operating Efficiency:

85%

85%

Weight:

49.9

kg

110

lbm

90

kg

185

lbm

Table 1:  Specifications for the KMD-50 and KMC-60 Electromechanical actuators

 

KMD-50 Actuator

Figure 1:   KMD-50 Actuator

 

KMD-50 Physical Dimensions

Figure 2:   KMD-50 Physical Dimensions

 

KMD-60 Actuator

Figure 3:   KMD-60 Actuator

Figure 4:   KMD-60 Physical Dimensions

 

Force vs. Velocity Curves for the KMD-50 with ORMEC MAC-NB330C Servo Motor.

Force/Velocity curve with MAC-NB330C and 1:1 Belt Ratio

Figure 5:  Force/Velocity curve with MAC-NB330C and 1:1 Belt Ratio

 

Force/Velocity curve with MAC-NB330C and 2:1 Belt Ratio

Figure 6:  Force/Velocity curve with MAC-NB330C and 2:1 Belt Ratio

 

Force/Velocity curve with MAC-NB700C and 1.05:1 (22/21) Belt Ratio

Figure 7:  Force/Velocity curve with MAC-NB700C and 1.05:1 (22/21) Belt Ratio

 

Force/Velocity curve with MAC-NB700C and 2:1 Belt Ratio

Figure 8:  Force/Velocity curve with MAC-NB700C and 2:1 Belt Ratio

 

ADDITIONAL ATTRIBUTES of the KMD Actuators: 

 

  • OUTPUT CONNECTION
    • KMD-50:  1.500-12 UNF MALE OR FEMALE OUTPUT CONNECTION
    • KMD-60:  1.875-12 UNF MALE OR FEMALE OUTPUT CONNECTION
  • STANDARD FRONT FLANGE OR REAR FLANGE MOUNTING
  • OIL LUBRICATED BALL SCREW
  • INTERNAL ANTI-ROTATION (OPTIONAL EXTERNAL)
  • MOUNT ROD UP, DOWN OR HORIZONTAL
  • EQUAL EXTEND AND RETRACT PERFORMANCE
  • INTERNAL END OF TRAVEL CUSHIONS (LOW ENERGY)

 

 

 

About ORMEC

 

ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC provides application expertise and systems solutions for all types of motion control challenges and offers a team of Systems and Applications Engineers with over 80 years of motion control experience. The company continues to be a leader in the development of motion control solutions and technology, including being the first to introduce an industrial motion control system using a high-speed FireWire network.

 

For more information visit the ORMEC website at www.ormec.com.

Available Now - 2-Year Warranty ORMEC Repair Services

 

     January 2, 2017– Rochester, New York, USA –   ORMEC is pleased to announce an enhancement to its Manufacturing Repair program.  Now all repairable items returned to ORMEC will receive a 2-Warranty again manufacturer defects. 

 

“It makes sense to apply the same 2-year warranty reserved for new ORMEC products to items sent to ORMEC for repair.  We do all the same tests, including an 8-hour high temperature burn-in under full load”, states Chris Suflita who is ORMEC’s Lean Manufacturing Manager.

 

The 2-year warranty for repairs is just another aspect of ORMEC’s long-term commitment to their customers

 

About ORMEC

 

     ORMEC’s industry experts provide motion control solutions in the aerospace, automotive, energy, medical, pharmaceutical, food and beverage, textile, paper, packaging, metal forming and converting industries. Our systems excel in the most demanding applications including packaging, converting, labeling, web and material handling, as well as general assembly and winding.

 

     Our highly reliable motion control solutions integrate motion controllers, logic control, servo drives, servo motors, linear motors, actuators, HMIs, and I/O into cost-effective factory automation solutions. ORMEC  provides  application  expertise and systems solutions for all  types  of  motion  control  challenges and  offers  a  team  of  Systems  and Applications  Engineers  with  over  80 years  of  motion  control  experience.  The  company continues  to  be  a  leader  in  the  development  of  motion  control  solutions and technology, including  being  the  first  to  introduce  an  industrial  motion  control  system  using  a  high-speed  FireWire  network.

 

    For further information visit the ORMEC website at www.ormec.com.  

Contact Us

Our motion control experts are available to assist you.

Contact Form

ORMEC Systems Corp.
19 Linden Park
Rochester, NY 14625
phone: (585) 385-3520
fax:     (585) 385-5999

Sales & Marketing Info:
phone: (585) 385-3520
email: sales@ormec.com

Applications:
phone: (585) 385-3520
email: sales@ormec.com

Technical Support:
email: support@ormec.com
In U.S.: (585) 385-3520
From Europe:  +1 (585) 385-3520

Map to ORMEC and accommodations